Get matched
A tool bag, a cordless drill, spanners, door rollers and hinges laid out on a garage floor beside a technician's work boots.

Christchurch, Canterbury

Garage doors in Christchurch

Choose the job and pop in your postcode, and a door business working around Christchurch contacts you to talk it through.

  • Matched to a door specialist who does your job
  • Only one door specialist gets your number

Four quick questions

What's the job in Christchurch?

Off its track or a broken spring? Keep clear and don't force it.

Only one local door specialist gets your number.

  • Matched to a door specialist who does your job

    Each business tells us which jobs it takes: new doors, replacements, openers, repairs or gates.

  • Only one door specialist gets your number

    Your name and mobile go to the one business that takes the job.

What happens next

Tell us the job
  1. Tell us the job

    The job and the postcode, a few taps. Then your first name and mobile.

  2. A door specialist takes it

    A local door specialist who does this kind of job picks it up.

  3. They call you

    From their own mobile, to talk it through and quote. Then you decide.

Four small gabled garages in a row under a bush covered bank, with grey, red, pale blue and rusty roller doors and corrugated iron roofs, fronting a wet street.
A row of old single garages with roller doors in Sumner, Christchurch.

Garage doors in Christchurch: what to know before you call

From the Port Hills across the plains to Rolleston

What people ask for around Christchurch

New homes on the edge of the city need doors and openers from the start, and older homes need tilt doors replaced and motors added. Repairs make up the rest, from a door that has gone heavy to a cable that has come off its drum.

Repair searches run well past the city boundary too. If you are after garage door repairs in Rolleston, or anywhere else on the plains, send the job with your postcode and it goes to door businesses covering that area. There is a separate page on garage door repairs in Christchurch.

Choosing a garage door opener in Christchurch

An opener has to suit the door it lifts. Dominator rates its Smart Pro for doors up to 300kg and its Smart and Secure for doors up to 235kg, all for doors up to 18m2. Its roller door opener is the Excel, and Merlin's roller door range is the SilentDrive.

The door has to run well before any motor goes on. Dominator's opener warranty requires that the door can be moved by hand with no more than 20kg of force. B&D NZ gives 20kg for sectional doors and 15kg for roller doors.

Power is the other question. Dominator's manual asks for a properly earthed 3-pin power point on the ceiling within arm's length of the opener. A new power point is fixed wiring, so it is a job for a licensed electrician, who must give you a Certificate of Compliance no later than 20 days after finishing.

The wind, day to day and at its worst

Christchurch Airport averages 14.4 km/h of wind, peaking at 17.3 km/h in January and dropping to 11.1 km/h in June, NIWA says. The dominant direction is east-north-east, the wind locals know as the nor'easter.

The big blows come from another quarter. The airport's highest gust, 172.4 km/h, came from the west-north-west on 1 August 1975. NIWA counts 52 days a year with gusts over 61 km/h. In spring, about 7 of the year's 20 or so strong wind days arrive.

A garage facing either of those directions takes more of a beating than one tucked behind the house. If yours does, tell the door specialist and ask about a stiffer door profile and the opener's obstruction settings.

Around Christchurch

Lyttelton and the harbour

Lyttelton Harbour is breezier than the airport, at 15.9 km/h against 14.4 km/h, and as MBIE quotes NZS 3604, homes within 500 m of the sea or a harbour sit in exposure Zone D.

Near an estuary

Zone D also reaches 100 m from tidal estuaries, but it is not automatic. In one determination MBIE placed a house near a tidal estuary in Zone C, because the specifics of the site count.

The council

Christchurch City Council covers the city. Check with your own council about a building consent before work that alters the opening or the framing: MBIE's guidance never names garage doors.

Doors made in the city

Dominator says it has manufacturing facilities in Christchurch and Auckland, and Garador says its doors are made in one or the other.

What we would do

Have the springs checked at the same visit the opener goes in. A motor on a poorly balanced door works harder and can put the warranty at risk, so ask the door specialist to feel the door by hand first and tell you what it weighs in use.

Questions people ask

Who puts in the power point for a garage door opener in Christchurch?

A new power point or hard-wired opener is fixed wiring, which only registered and licensed electrical workers can do. They issue a Certificate of Compliance for it. Ask the door specialist what your garage already has.

Do door specialists do garage door repairs in Rolleston?

Send the job with your Rolleston postcode. It goes to door businesses that cover the area and take repair work, and the first to take it gets in touch.

Ready for a door specialist in Christchurch?

Tell us the job and the postcode. The rest takes about a minute, and one local door specialist who does that work calls you.

Four quick questions

What's the job in Christchurch?

Off its track or a broken spring? Keep clear and don't force it.

Only one local door specialist gets your number.

Where this information comes from

Rules change, so check with your council or the regulator if something matters to your job. How we write and check these pages.